DG PSEVM Elektro-Magnet Kilit
This locking device is an elegant solution to control electrically a 10 or 12 mmtempered glass
door while maintaining security and architectural aesthetics. 2 models are available : PSEVM requires no cut-out in glass door, SEVM requires cut-outs. Fail safe operation only.
door while maintaining security and architectural aesthetics. 2 models are available : PSEVM requires no cut-out in glass door, SEVM requires cut-outs. Fail safe operation only.
Açıklama
Strong points
• Anti-panic system
• On request : specific model approved for emergency exit glass doors (24 VDC power supply)
• Compatiblewith any access control : card reader, interphone, keypad etc…for installation, a hole in glass is required
• Holding force : 300 kgs
• Power supply with flexible door loops
• For single or double doors
• Optional time delay
Operation
Exterior opening
• Electric opening with any access control system
Interior opening
• Electric opening with push buttom
Construction
Strip lock Anodized aluminium (other finishes on request)
Bolt Stainless steel
Height 125 or 200 mm
Door clearance 3 mm between glass leaves and 2 mm with door frame
Electrical Specifications
Fail safe operation
• Supply 12 or 24 VDC
• Consumption 12 VDC : 500 m A - 24 VDC : 250 m A
Scope of supply
- Interior push buttom
- Flexible door loop
On request :
•Matching extension strips for fixed glass panels to be glued
• Keypad fixed on the strip
• Flexible door loop
• Adaptation for emergency exit doors
• Time delay (12v or 24v)
Standard finishes
See detailed list